High-power LED street lighting ufm-64B1

The ufm-64B1 is already the 3rd generation of the patent-registered silence lights. high-power LED street luminaires. At this model the efficiency compared to the ufm-64B0 has been increased again. The radiation pattern as well as the luminous flux is nearly equal to the ufm-64B0. Due to the application of new developed power supply and a new generation of LEDs the power consumption could be reduced further. Additionally at the ufm-64B0 we make use of an active PFC to minimize the network load. Technical data: Power consumption: 58W; luminous flux at operating temperature: 3,650 lm; luminaire efficiency: 63 lm/W, special features: TÜV DIN EN 60598-2-3:2003 certified, active PFC; attachment: pylon diameter up to 80mm.

High-power LED car cabin light

Within the most cars the lighting equipments are more than inadequate. Despite activated car cabin light the view will be insufficient, especially within the cargo bays. However, there’s an end of it! Experience the newest LED method within your own car. The praeclarus car cabin light (awarded with the caravanning design award 2008/2009) outshines the 20W light bulbs of the cabin light at less than 4W power consumption. Also the assembly is easy. Due to an ultra-strong adhesive tape at the reverse side of the light, it can be fixed also quickly at textiles. Just connect the praeclarus then at the 12V board-net and you’ll be nevermore with darkness. Technical data: Power consumption: 3,7W; luminous flux at the operating temperature: 107 lm; color temperature: 2.900K; light efficiency: 29 lm/W; special features: e1 accreditation

System for optical quality control

The swiss company Trüb AG commissioned us with the development and production of a screening unit for the quality control of their products. The major problem was the screening of a heat-sensitive plastic plate with very short dimensions. Additional the plate was partly printed with reflective finish. After a couple of test series we have found a solution, however. The kdl-04C0 works with the newest generation of high-power LED. These generate an intensity of illumination exceeding 230.000 lux on the surface. Certainly this huge brightness demanded precautions for the user. Therefore we supplied the kdl-04C0 with a double-stage safety-system. The user has to activate the pedal switch first and to wait for the acoustic signal. Starting from now the user has the possibility to activate the screening unit through the key button within the mainframe.