For over 50 years, our family business has worked with a forward-looking spectrum of products, solutions and services for the complete planning and implementation of supply systems for water, energy and heat/air. Our particular expertise lies in the development of alternative and innovative energy concepts as well as the tapping and use of water resources. Water is life - and thus, one of the most important natural resources. We firmly that the future of our modern civilisation will depend on how we make use of our environments treasures efficiently and responsibly. As your partners in energy we are a competent partner, producer and supplier of vitally important technical systems. The purpose and essence of our work is to channel water and the accompanying flux of energy. We combine our knowlegde about resources and their potential with the opportunities presented by cutting-edge technology. Our services range from overall planning, to production and fitting, to long-term warranty and service agreements. The resulting products are highly efficient, sustainable and a secure investment. We guarantee technical perfection in all processes and in every last detail. We try to balance the social implications with the natural consequences of all our endeavours in order to guarantee economic and ecological sustainability. We work throughout Germany. Our experts are primed for imminent international assignments; their know-how encompasses linguistic and cultural factors as well as technical parameters and legal implications.
Lodewick GmbH
References
-
Airbus, Hamburg
Goods and services supplied: Supply of compressed air for varnishing and processing, control, breathing and work purposes Airbus manufacture the largest passenger plane of the world, the A 380 (technical data: length: 73.0 m / wing span: 79.8 m / height: 24.1 m / range: 14,800 km / capacity: 3-class layout with 555 up to a maximum of 840 seats). Our contract included the supply of the varnishing halls with compressed air for varnishing and processing, control air, air for breathing and working purposes as well as the complete range of sanitary installations. Some of the pipelines had to be installed at heights of up to 38m. For the compressed air supply, approx. 6,000m of DN 200 - DN 15 pipes with the necessary shut-off and safety relief valves as well as tele-platforms of the compressed air stations for the supply of the individual work places were installed. Sanitary installation: Rain water: galvanized steel pipe DN 500 - DN 50, make: Loro Drinking water: copper pipe, make: Kabelmetall/Mapress Sewage: SML-pipe DN 200 - DN 50, make: Saint Gobain Shut-off valves: gunmetal DN 150 - DN 15, make: Kemper Dimensions of each hall: length 97 m / width 77 m / height 26 m As a rule, each hall disposes of the floor space for 4 - 6 airplanes. In each hall, 24 media connection shafts are provided for the work to be performed. 2,600 m of rain water and sewage pipelines in SML-pipe of the make Saint Gobain. 2,700 m of pipelines for the supply of drinking water and water for fire fighting, consisting of Cu-pipe, Make: Kabelmetall 120 shut-off valves executed as gunmetal fittings in slanted-seat flange valves, make: Kemper
Casualty Hospital Murnau
Goods and services delivered: All sanitary facilities Installation, commissioning and delivery were performed under the latest guidelines of the regulations for drinking water supply, the TrinkwV 2001. This means, that the entire pipe network was pressure-tested hydraulically with nitrogen. Only 3 days before the hospital went into operation, Lodewick GmbH filled the entire system with water and commissioned relevant laboratory tests to prove the required water quality. One fundamental requirement for performing this work was the excellent implementation planning by the engineering office Gangl from Munich, who also monitored all building work for the entire construction project. The goods and services listed below were supplied by Lodewick GmbH in construction phase UKM 24: In the sewage sector, 5,500 running m of cast-iron SML-pipes without sleeves of the make Saint Gobain were placed. For the drinking water facilities, we installed approx. 13,000 running m of stainless steel pipe with press-fittings of the make Geberit-Mapress. All shut-off valves were installed using gunmetal models by the manufacturer Kemper. In this installation as a whole and in particular in the area of hot water treatment, new standards with respect to legionella control and security of supply to the individual wards were established within the framework of this project
Further information
Type of Business
- Engineering,
- Installation,
- Construction
Technology
- Energy efficiency in industry and trade: electricity sector:
- Air compressor technology
- Energy efficiency in industry and trade: heating and cooling sectors:
- Aircooled /watercooled chillers,
- Condensors and evaporators,
- Cooling towers,
- Heat exchanger technology,
- HVAC technologies (heating, ventilation and air conditioning),
- Ice bank technology,
- Industrial heat pump technology,
- Refrigeration plant technology and equipment,
- Heat exchanger technology,
- Hot water boiler technology,
- Industrial heat pump technology,
- Screw-type steam engine technology,
- Steam boiler technology,
- Steam turbine technology
- Combined heating, cooling and electricity generation:
- Biomass cogeneration (CHP),
- Cogeneration /combined Heat and Power (CHP),
- Geothermal heat and power (CHP),
- Organic rankine cycle technology
- Industrial and private heating and cooling:
- Absorbtion chillers,
- Concentrated solar thermal systems,
- Solar thermal systems (large-scale),
- Stirling engine technology
Classification
- Electricity generation and heating/cooling:
- Renewable power generation
- Energy efficiency in buildings:
- Heating and air-conditioning systems